Course Description
- Eddy Current training suitable for PCN/ISO 9712 Levels 1, 2, and 3, and ASNT Level 3. Alternatively, we can provide training suitable for candidates working to an employer written practice based on SNT-TC-1A; EN4179 and NAS410.
- Eddy Current Testing is separated into three specific product sectors for certification purposes: Welds, Wrought Products (Forgings), and Tubes (only available at Level 2).
- Lavender International follows the BS EN ISO (PCN) 9712 – NDT Qualification and Certification of NDT Personnel Standard for its Level 3 programmes. Lavender International cannot provide ASNT NDT Level 3 exams but can provide advice on the exam and training in preparation for the exam and contact information for exam locations in the UK and worldwide.
Learning Overview
- Select the Eddy Current technique for the test method to be used;
- Define the limitations of application of the testing method;
- Translate NDT codes, standards, specifications and procedures into NDT instructions adapted to the actual working conditions;
- Set up and verify equipment settings;
- Perform and supervise tests;
- Interpret and evaluate results according to applicable standards, codes, specifications or procedures;
- Prepare Eddy Current written instructions
- Carry out and supervise all tasks at or below level 2;
- Provide guidance for personnel at or below level 2, and
- Report the results of Eddy Current test
Availability
UK Office
Sheffield, South Yorkshire
- 21st September – 2nd October 2026 Level 2
- 9th – 20th November 2026 Level 2
- 8th – 19th March 2027 Level 2
- 23rd March – 3rd April 2027 Level 2 Full
- 22nd June – 3rd July 2027 Level 2
We run recertification examinations every week in the majority of our methods.
Please contact us for more details: enquiries@lavender-ndt.com
Course Suitability
Course Suitability – Work Experience and Prerequisites
All students who wish to undertake main method Level 3 certification must hold a valid Basic exam (PCN) or equivalent ISO9712 acceptable certification.
Supervised work experience, can be obtained either before the examination, or within 24 months after passing the exam.
To progress from Level 2 to Level 3 requires a minimum amount of time spent as a Level 2. However, the time required varies from scheme to scheme and you are advised to review the appropriate scheme document when considering becoming a Level 3.
Issuing Certification
Once the training hours have been obtained, the examination passed, and supervised work experience obtained within 24 months of passing the exam, PCN will issue certification.
Equipment Required
All equipment is provided, you are expected to bring your own safety boots and overalls/lab coat as well as a scientific Calculator. We all training materials with the exception of Level 3 Text Books.
- Safety Boots
- Lab coat / Overalls
- Scientific Calculator
NOTE
We provide all training materials with the exception of Level 3 Text Books.
