Course Description
- Ultrasonic testing training suitable for PCN/ISO 9712 Levels 1, 2, and 3, and ASNT Level 3.
- Alternatively, we can provide training suitable for candidates working to an employer written practice based on SNT-TC-1A; EN4179 and NAS410.
- Ultrasonic Testing is separated into various specific product sectors for certification purposes: Welds, Castings and wrought products.
- We also offer a wide range of supplementary categories Plate, Pipe, Nozzle, Node, and T at Level 2.
- Lavender International follows the BS EN ISO (PCN) 9712 – NDT Qualification and Certification of NDT Personnel Standard for its Level 3 programmes. Lavender International cannot provide ASNT NDT Level 3 exams but can provide advice on the exam and training in preparation for the exam and contact information for exam locations in the UK and worldwide.
Learning Overview
What are the responsibilities of a individual who is certified to Ultrasonic Level 2?
An individual certified to Ultrasonic Level 2 has demonstrated competence to perform NDT according to Ultrasonic Testing procedures.
- Select the Ultrasonic technique for the test method to be used
- Define the limitations of application of the testing method
- Translate NDT codes, standards, specifications and procedures into NDT instructions adapted to the actual working conditions
- Set up and verify equipment settings
- Perform and supervise tests
- Interpret and evaluate results according to applicable standards, codes, specifications or procedures
- Prepare Ultrasonic written instructions
- Carry out and supervise all tasks at or below level 2
- Provide guidance for personnel at or below level 2
- Report the results of Ultrasonic test
Availability
UK Office
Rotherham, South Yorkshire
- 28th September 2026 Level 2
- 12th October 2026 Level 2
- 9th November 2026 Level 2
Sheffield, South Yorkshire
- 5th – 9th October 2026 Level 3 Full
- 12th – 16th October 2026 Level 3 Full
- 19th – 23rd October 2026 Level 3
- 23rd – 27th November 2026 Level 3
- 30th November – 4th December 2026 Level 3
USA Office
Houston, Texas
- 14th – 30th September 2026
- 14th – 30th September 2026 Level 2
- 19th October – 4th November 2026 Level 2
- 19th October – 4th November 2026 Level 2
We run recertification examinations every week in the majority of our methods.
Please contact us for more details: enquiries@lavender-ndt.com
Course Suitability – Work Experience and Prerequisites
All personnel wishing to carry out a supplementary category training must already hold the relevant Ultrasonic qualification. Please contact the team to discuss this.
All students who wish to undertake main method Level 3 certification must hold a valid Basic exam (PCN) or equivalent ISO9712 acceptable certification.
Supervised work experience, can be obtained either before the examination, or within 24 months after passing the exam.
To progress from Level 2 to Level 3 requires a minimum amount of time spent as a Level 2. However, the time required varies from scheme to scheme and you are advised to review the appropriate scheme document when considering becoming a Level 3.
Issuing Certification
Once the training hours have been obtained, the examination passed, and supervised work experience obtained within 24 months of passing the exam, PCN will issue certification.
Equipment Required
- Safety Boots
- Lab coat / Overalls
- Scientific Calculator
NOTE
We provide all training materials with the exception of Level 3 Text Books.
